Data Sheet for Product

6
Siemens A6V12153307_en--_b
Smart Infrastructure 2022-02-18
Power supply
NEC Class 2
Transformer with secondary current limitation of max.
4A or external secondary current fuse
Non-renewable fuse
Circuit breakers
Max. 4A slow-blow
Max. 4A, characteristic B, C, D as per EN60898
Transformer secondary neutral connected to approved building ground.
Apparent power for transformer design
Load Power
Base load including I/O without load by field devices 8VA
Max. output load Triac at 250mA each 8 x 6 = 48VA
Max. load KNX PL-Link at 50mA 4VA
Max. load for DC24V field supply at 100 mA 6VA
Power consumption including connected field devices 66VA
Inputs
The inputs are protected against incorrect wiring AC 24 V.
Resistance sensor, analog (inputs X...)
Type Range (over range) Resolution
AI 1000 Ohm*) 1 kΩ (0...1.05 kΩ) 1 Ω
AI 2500 Ohm*) 2.5 kΩ (0...2.625 kΩ) 2.5 Ω
AI 10 kOhm*) 10 kΩ (0...10.5 kΩ) 10 Ω
AI 100 kOhm*) 100 kΩ (0...105 kΩ) 100 Ω
Temperature measurement, analog (inputs X...)
Type Range (over range) Resolution
AI PT1K 375(NA) *) -40...70 °C (-45...75 °C)
-40...158 °F (-49...167 °F)
25 mK
0.045 °F
AI PT1K 385(EU) *) -40...70 °C (-45...75 °C)
-40...158 °F (-49...167 °F)
25 mK
0.045 °F
AI (LG-)Ni1000*) -40...70 °C (-45...75 °C)
-40...158 °F (-49...167 °F)
25 mK
0.045 °F
AI Ni1000 DIN*) -40...70 °C (-45...75 °C)
-40...158 °F (-49...167 °F)
25 mK
0.045 °F
AI T1 (PTC)*) -40...70 °C (-45...75 °C)
-40...158 °F (-49...167 °F)
100 mK
0.18 °F
AI NTC10K -40...70 °C (-45...75 °C)
-40...158 °F (-49...167 °F)
25 mK (25 °C)
0.045 °F (77 °F)
AI NTC100K -10...70 °C (-15...75 °C)
14...158 °F (5...167 °F)
25 mK (25 °C)
0.045 °F (77 °F)
*) A fixed value of 1 Ω is calibrated to correct line resistance.
Voltage measurement, analog (inputs X...)
Type Range (over range) Resolution
AI 0...10V 0...10V (-1...11 V) 2 mV
AI 0...10 V standard 0...100% (-10...110%) 2 mV
Open connection: Negative voltage -1.5 V, 8 μA (line failure detection)
Use 499Ω Resistor Kit (see Accessories) to convert 4-20mA input to 0-10V input and power 4-20mA device from
DC 24V sensor supply.