Environmental Declaration

EPD - Type II
According to ISO 14021
*Variant parts list
[g]
QMX3.P02 Main PCBA
QMX3.P30 Main PCBA
QMX3.P34&37&74 Main PCBA
QMX3.P70 Main PCBA
QMX3.P34&37 Sub PCBA
QMX3.P74 Sub PCBA
QMX3.P34&74 Touch PCBA
QMX3.P37 Touch PCBA
Comments
Regulation (EC) No. 1907/2006 (REACH)
The device is halogen-free with exception of:
The device is classified as waste electronic equipment in terms of the European Directive 2012/19/EU (WEEE) and must
not be disposed of as unsorted municipal waste. The relevant national legal rules are to be adhered too. Regarding
disposal, use the systems setup for collecting electronic waste.
Observe all local and applicable laws.
Disposal
EU-directive 2011/65/EU (RoHS)
The device does not contain substances in concentrations and applications banned under the EU RoHS Directive.
To the best of our knowledge and according to the information of our suppliers the above mentioned device and its packaging contain no substances of the
candidate list according to Article 59 (1, 10) of the regulation (EC) No. 1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH) in concentrations above 0.1 % w/w.
(Status according to the creation date of this document.)
10
4
37
19
2
37
QMX3.P74
10
2
4
13
QMX3.P02
23
11
QMX3.P30 QMX3.P70 QMX3.P37
37
QMX3.P34
CM2E1602 26.07.2013
The device is halogen-free with exception of:
PCB (TBBA)
Please contact your local Siemens branch office to get further information on environmental aspects and disposal.
Legal Disclaimer: This declaration is for information purpose only.
Beijing Siemens Cerberus Electronics Ltd. therefore does not assume liability for any error or for any consequences which may arise from the use of this information to the
maximum extent under the law.
This Environmental Product Declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that the product will retain a particular
composition for a particular period.
Page 2/2