Katalog

Automation Controller
Automationsstationen
Desigo PX Open
NEUE PRODUKTE
3-16
2015www.siemens.com/buildingtechnologies-productcatalogSiemens Schweiz AG
Building Technologies Division
3
Produkttitel Kommunikation Datenblatt Artikel-Nr. Typ
System-Controller für die Inte-
gration von KNX‚ M-Bus‚ Mod-
bus oder SCL über BAC-
net/LonTalk
Bus: BACnet / LonTalk N9223 S55372-C113 PXC001.D
System-Controller für die Inte-
gration von KNX‚ M-Bus‚ Mod-
bus oder SCL über BACnet/IP
Bus: BACnet / IP N9223 S55372-C114 PXC001-E.D
Optionsmodul für Integration
bis 800 Datenpunkte (M-Bus‚
Modbus‚ SCL)
M-Bus
Modbus
SCL
N9223 S55372-C115 PXA40-RS1
Optionsmodul für Integration
bis 1000 (SCL) oder 2000 (M-
Bus‚ Modbus) Datenpunkte
M-Bus
Modbus
SCL
N9223 S55372-C116 PXA40-RS2
Hardware für PX M-Bus
Artikel-Nr. Typ
BPZ:PX Modbus PX Modbus
System-Controller PX Modbus
PX Modbus stellt eine Plattform für Integration verschiedener Drittsysteme und -geräte zur Verfügung.
Es ermöglicht‚ Information mit der Automationsebene des Desigo Gebäudeautomationssystems auszu-
tauschen.
V BTL getestete BACnet Kommunikation auf LonTalk oder IP übereinstimmend mit dem BACnet-Stan-
dard (Rev. 1.12 - ab Desigo V6.0) inklusive B-BC Profil
V AMEV Profile AS-A und AS-B gemäss Empfehlung 'BACnet 2011 - Version 1.2 (ab Desigo V6.0)'
Funktionen
PX Modbus unterstützt folgende Modbus Funktionscodes und Datenformate:
V Funktionscodes: 01‚ 02‚ 03‚ 04‚ 05‚ 06‚ 15‚ 16
V Datenformate:
- 16-bit signed and unsigned integers
- 32-bit signed and unsigned integers
- 32-bit signed and unsigned 'Modulus-10000'
- Reell 32-bit (IEEE floating point)
- ACM 16-bit
- BCD 16-bit and 32-bit
Master oder Slave
V PX Modbus kann entweder als Master oder als Slave konfiguriert werden. Es unterstützt bis zu 2000
Datenpunkte von einem Drittsystem.
PX Modbus