Catalog

4-10
Siemens Switzerland Ltd http://www.siemens.com/buildingtechnologies-productcatalog 2015
Building Technologies Division
4
Room automation
Overview and selection tools
Configurable Room Automation Station with BACnet
Presence and brightness sensor (KNX PL-link)
UP 258D11 UP 258D12
Features
Presence detector
n n
Detection area at mounting height 2.5 m (m) 3 4.5
Brightness sensor
n n
Integration into DXR2..
Data points
2 2
KNX PL-link bus load (mA)
10 10
Actuator for VAV (KNX PL-Link)
VAV compact controller
GDB181.1E/KN GLB181.1E/KN
Features
Torque (Nm)
5 10
Air damper area (m2)
0.8 1.5
Operating range (Pa)
0…300 0…300
Operating voltage (V AC)
24 24
Integration into DXR2..
Data points
2 2
KNX PL-link bus load (mA)
5 5
Lighting and shading
Application can be configured from these functions:
Every DXR2.. controls up to 4 lighting groups with:
• Manual switched control
• Manual dimmed control with dimming actuators
• Automatic presence control
• Automatic brightness control with dimming actuators
• Constant light control with dimming actuators
• Multi group constant light control
• LED support on push buttons
• Green Leaf - RoomOptiControl
• Burn-in and operating hours function
Every DXR2.. controls up to 2 blinds with:
• Manual control
• Automatic control with anti glare function and energy efficiency
function (requires facade control from central functions)
• Green Leaf - RoomOptiControl
• Collision detection
Lighting Shading
Number of outputs,
Actuators for lighting (KNX PL-Link)
1-4
Number of outputs,
Actuators for shading (KNX PL-Link)
1-2