Catalog

Room automation
Desigo TRA
Modular room automation stations PXC3..
4-32
2015Some products are not available in every country
www.siemens.com/buildingtechnologies-productcatalog
Siemens Switzerland Ltd
Building Technologies Division
4
Product Title Communication Data sheet Stock No. Product No.
Room automation station BAC-
net / IP‚ for up to 4 rooms / 8
room segments
BACnet / IP
KNX PL-Link / S-Mode
Island bus
N9203 S55376-C100 PXC3.E72
Room automation station BAC-
net / IP and DALI‚ for up to 4
rooms / 8 room segments
BACnet / IP
KNX PL-Link / S-Mode
DALI
Island bus
N9203 S55376-C101 PXC3.E72A
Room automation station BAC-
net / IP‚ for up to 8 rooms / 16
room segments
BACnet / IP
KNX PL-Link / S-Mode
Island bus
N9203 S55376-C102 PXC3.E75
Room automation station BAC-
net / IP and DALI‚ for up to 8
rooms / 16 room segments
BACnet / IP
KNX PL-Link / S-Mode
DALI
Island bus
N9203 S55376-C103 PXC3.E75A
Range overview PXC3.E.. for Desigo V5
Data sheet N9203
Operating voltage AC 24 V
Frequency 50/60 Hz
Degree of protection IP20
Dimensions (W x H x D) 162 x 74 x 90 mm
Room automation stations
Modular‚ freely programmable room automation station for HVAC‚ lighting and shading (TRA‚ Total
Room Automation):
V BTL tested BACnet/IP communication acoording to BACnet standard (rev 1.13) include B-ASC profile
V Island bus to connect TX-I/O modules with any data point mix (including bus supply) (not with
PXC3.E16A)
V KNX bus for direct connection of peripheral devices using KNX PL-Link or KNX S-mode communication
(including bus supply) (not with PXC3.E16A)
V DALI bus to connect lighting controls (only controller types PXC3...A)
V USB interface for tool
V Mounting on standard mounting rail
V 2-port Ethernet switch for low-cost cabling
PXC3.E..