User Guide

Configuration
Reports
4
A6V11938631_en--_c
2022-03-15
27 | 38
1. Click to delete a device from monitoring.
 The device displays in the Discovered devices list again.
2. Click and drag-and-drop items in the list to rearrange the order of the assigned devices,.
Adjusting the parameters for device discovery
This procedure modifies the properties of device discovery. For example, you can limit the discovery to the local
network and a specific range of device numbers.
1. Click Options to open the filtered properties of Discovered devices.
2. Use the following table to make selections for each parameter.
Setting
Description
Discovery scope
Determines if the device discovery is restricted to the local network or if remote networks are
included.
Options: Local network or Remote network.
If Remote network is selected, verify that the Network number setting is correct.
Network number
The network number to use for the device discovery.
Device range, maximum
Device range, minimum
Limits the device discovery to a range of devices.
The maximum value is 4194302. The minimum value is 1.
3rd party devices
Determines if third-party devices are included in the device discovery.
Select False to exclude third-party devices, or True to include third-party devices.
Table 11: Parameter settings for device discovery.
4.5 Reports
The following reports can be displayed, printed and / or saved to an Excel spreadsheet (.xls):
● Commissioning
● Data point test
Commissioning
The Commissioning report contains detailed information on the automation station’s connected field buses.