User Guide

Configuration
Assigned devices
4
26 | 38
2022-03-15
A6V11938631_en--_c
Settings for a user profile that never automatically logs out.
Step
Description
Setting
1
User profile settings
In ABT Site Settings > User profiles > Roles, set Automatic
logout to No.
2
Account menu settings
Select > Settings and switch On Keep room user logged in.
Table 10: Settings for a user profile that never automatically logs out.
4.4 Assigned devices
Assigned devices displays information for the remote automation stations that are accessible for system control.
Assigned devices is only available for PXC5 controllers. A maximum of 50 assigned devices is supported.
Discovering and assigning devices
Use this procedure to discover all devices communicating on the network and assign the desired devices for
monitoring.
1. Navigate to Configuration > Assigned devices and click Discover to trigger a discovery.
 A list of all devices communicating on the specified network displays, including the PXC5 discovering itself.
2. Do one of the following:
– Click Assign for the device(s) you want to monitor.
– Click Assign all to assign all devices for monitoring.
 The selected devices are now available for monitoring.
Managing Assigned devices
Use this procedure to remove devices from monitoring and / or rearrange the Assigned devices list.