Commissioning Instructions

Workflows
Modifying IP network settings
4
61 | 76
Siemens
A6V10429119_en--_a_07
Building Technologies
2018-12-19
4.5 Modifying IP network settings
Use this procedure to modify the IP network settings for a PXG3.W x 00 or PXM… touch panel.
1. Select > Favorite commissioning > Network port for IP.
 The following IP settings may be modified:
Network number
UDP port
IP address, subnet mask and default gateway
Enable (IP) DHCP
Device instance number
Device name
2. To modify other IP settings, click to display all properties.
3. Click Activate for the Command property to apply the new settings and then click OK to accept the warning.
 Depending on the settings modified, the device may reboot.