Commissioning Instructions

Workflows
Tool-free commissioning of an operating and monitoring system
4
59 | 76
Siemens
A6V10429119_en--_a_07
Building Technologies
2018-12-19
4.4.2 Subscribing to the time master
1. Select > Favorite commissioning > [operating and monitoring device].
2. Click to display all properties.
3. Select Time master reference, enter the device instance number of the time master and click OK.
 A time synchronization subscription is issued to the device you identified as the Time master reference.
 If the operating and monitoring device restarts, the current time is requested from the Time master
reference.
4.4.2.1 Time synchronization of the time master
1. If necessary, select > Favorite commissioning > [operating and monitoring device] and click to
display all properties.
2. Click Synchronize to issue a one-time Time synchronization command to all devices in the Assigned
devices list.
 The local time of the operating and monitoring device is used for this time synchronization.
 Any time masters in the Assigned devices list receive the current local time from the operating and
monitoring device.
Possible next step: Configuring for kiosk graphics on a touch panel [➙ 60].