Commissioning Instructions

ABT-SSA (Setup & Service Assistant)

User interface overview: Installation

19 | 76

Siemens

A6V10429119_en--_a_07

Building Technologies

2018-12-19

①

Select the number of data points to display in a page .

②

Search for the desired characters in all pages .

③

Browse through the pages .

Additional documentation

For help on mapping DXR2 connections to I/O addresses see the following topic.

DXR2.. Pins and addresses [➙ 62]

For further information on Hardware components, such as DXR2... automation stations or KNX PL-Link devices,

see the Hardware documentation reference file (pdf).

A6V10479649

2.4.1.1 Overview: State

The Overview > State view summarizes the status of the automation station and its buses and allows you to

start/stop the device, clear the device and remove overwritten data points.

Overview: State procedures

To perform the procedures in this section, select Overview in the command bar and State in the left navigation

pane.