Catalog

Room units and field devices
All room units and other KNX PL-Link devices
shown in the section “Configurable room
automation station“ can also be used with
a programmable room automation station.
Additionally, the following devices can be
used.
Product No. SSN Description
QMX7.E38 QMX7.E38 Touch room operator unit 4.3 inch for use with PXC3.E7.. and DXR2..E..
series room automation station
RXM21.1 S55376-C104 I/O block with KNX PL-Link for use with a PXC3.E7..
series room automation station
RXM39.1 S55376-C105 I/O block with KNX PL-Link for use with a PXC3.E7..
series room automation station
RL 513 5WG1 513-4DB23 Binary output (relay), 3 x AC 230 V, 6 A
RL 260/23 5WG1 260-4AB23 4-fold binary input, AC/DC12…230V
UP 255D21 5WG1 255-2DB21 Brightness sensor
PXC3.E16A-100A S55376-C118 BACnet / IP - DALI gateway
Room Automation with KNX
Topology
Thermostat with KNX
Type RDG100KN RDG160KN RDG400KN RDF800KN RDF600KN RDF301 RDF301.50 RDF301.50H RDU341
Applications
Fan coil 2-/4-pipe ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁
Fan coil with electrical heater ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁
Fan coil with radiator ⦁ ⦁
Heating / cooling 2-/4-pipe ⦁ ⦁ ⦁
Heat pump system ⦁ ⦁ ⦁ ⦁ ⦁
Variable air volume (VAV) ⦁ ⦁
VAV with electrical heater ⦁ ⦁
VAV with radiator / heat-cool coil ⦁
Design
Wall-mounted ⦁ ⦁ ⦁
Semi-flush-mounted ⦁ ⦁ ⦁ ⦁ ⦁ ⦁
for VDE/CEE box ⦁ ⦁
for British Standard box ⦁ ⦁ ⦁ ⦁ ⦁ ⦁
Touch screen display ⦁
Buttons for light and blind control ⦁
Button for hotel application ⦁
Power supply
Terminal voltage AC 230 V ⦁ ⦁ ⦁ ⦁ ⦁ ⦁
Terminal voltage AC 24 V ⦁ ⦁ ⦁
Inputs
Multifunctional inputs digital/analog 3 3 3 2 2 2 2 2 2
Outputs
ON/OFF (PWM) triac (H/C) ⦁ ⦁
ON/OFF relay (H/C) ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁
Analog outputs DC 0..10V (H/C) ⦁ ⦁ ⦁
3-stage relay (fan) ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁
Analog DC 0..10 V (fan) ⦁
4–24
4–25
1 1
3
2
3
2
4 4
Room automation
Overview and selection tools
Room automation
Overview and selection tools