Catalog

Presence and brightness sensor (KNX PL-Link)
UP 258D11 UP 258D12
Features
Presence detector ⦁ ⦁
Detection area at mounting height 2.5 m (m) 3 4.5
Brightness sensor ⦁ ⦁
Integration into DXR2..
Data points 2 2
KNX PL-Link bus load (mA) 10 10
Actuator for VAV (KNX PL-Link)
VAV compact controller GDB181.1E/KN GLB181.1E/KN
Features
Torque (Nm) 5 10
Air damper area (m
2
) 0.8 1.5
Operating range (Pa) 0…300 0…300
Operating voltage (V AC) 24 24
Integration into DXR2..
Data points 2 2
KNX PL-Link bus load (mA) 5 5
Lighting and shading
Application can be configured from these functions:
Every DXR2.. controls up to 4 lighting groups with:
• Manual switching control
• Manual dimming control with dimming actuators
• Automatic presence control
• Automatic brightness control with dimming actuators
• Constant light control with dimming actuators
• Multi-group constant light control
• LED support on push buttons
• Green Leaf – RoomOptiControl
• Burn-in and operating hours function
Every DXR2.. controls up to 2 blinds with:
• Manual control
• Automatic control with anti-glare function and energy-efficiency
function (requires facade control from central functions)
• Green Leaf – RoomOptiControl
• Collision detection
Lighting Shading
Number of outputs,
Actuators for lighting (KNX PL-Link)
1–4
Number of outputs,
Actuators for shading (KNX PL-Link)
1–2
Push buttons (KNX PL-Link)
UP
220/31
UP
221..
UP
222..
UP
223..
UP
285..
UP
286
UP
287..
P02 P37
Features
Display ⦁
Mode selection ⦁
Fan switch ⦁
Set point adjuster ⦁
Operation of light and shading ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁
Temperature sensor ⦁ ⦁
Bus transceiver modules UP117 ⦁ ⦁ ⦁ ⦁ ⦁ ⦁
Bus transceiver modules in lighting actuator UP510/03 or
UP525/03
⦁ ⦁ ⦁ ⦁ ⦁ ⦁
Bus transceiver modules in shading actuator UP520/03 ⦁ ⦁ ⦁ ⦁ ⦁ ⦁
Light control (1x toggle) 1 1 1 1 1 1 1
Light control (2x toggle) 1 1 1 1 1 1 1
Light control (3x toggle) 1 1 1 1 1
Light control (4x toggle) 1 1 1 1 1
Light control (1x dimming or switching) 1 1 1 1 1 1 1 1 1
Light control (2x dimming or switching) 1 1 1 1 1 1 1
Light control (3x dimming or switching) 2 1 1 1 1
Light control (4x dimming or switching) 2 1 1 1
Shading control (1x shading) 1 1 1 1 1 1 1
Shading control (2x shading) 1 2 1 2 1 1 1
Combined control (1x toggle and 1x shading) 1 1 1 1 1 1 1
Combined control (2x toggle and 1x shading) 1 1 1 1 1 1 1
Combined control (3x toggle and 1x shading) 1 1 1 1
Combined control (4x toggle and 1x shading) 1 1 1 1
Combined control (1x toggle and 2x shading) 1 1 1 1
Combined control (2x toggle and 2x shading) 1 1 1 1
Combined control (3x toggle and 2x shading) 1 1 1
Combined control (4x toggle and 2x shading) 1 1 1
Combined control (1x dimming or switching and 1x shading) 1 1 1 1 1 1 1
Combined control (2x dimming or switching and 1x shading) 1 1 1 1
Combined control (1x dimming or switching and 2x shading) 1 1 1 1
Combined control (2x dimming or switching and 2x shading) 1 1 1
Status LED ⦁ ⦁ ⦁ ⦁ ⦁ ⦁
Integration into DXR2…
Data points 4 2 4 6 2 4 8 9 11
KNX PL-Link bus load (mA) 10 10 10 10 10 10 10 7.5 10
4–12
4–13
1 1
3
2
3
2
4 4
Room automation
Overview and selection tools
Room automation
Overview and selection tools