Catalog

Room sensor and operating
Application can be configured from these functions:
• Room operating units QMX3 on KNX PL-Link
• Sensors for onboard IOs or KNX PL-Link
• Presence/brightness sensors for onboard IOs or KNX PL-Link
• Push buttons for light and shading on KNX PL-Link
• Window contacts for onboard IOs
• Collision detectors for onboard IOs
T
AQ
H
Lux
Temperature
sensor
Air quality
sensor
Humidity sensor Brightness
sensor
Presence
detector
Collision
detector
DI 2 2
AI 1 1 1
HVAC sensor (KNX PL-Link) 1 1 1
Presence and brightness
sensor (KNX PL-Link)
1 1–4*
Room unit (KNX PL-Link) 1 1 1
Combined room unit
(KNX PL-Link)
1
* Must be the same device
Window contact Room operator unit Light control Shading control Combined control
DI 1
Room unit (KNX PL-Link) 2*
Combined room unit
(KNX PL-Link)
1** 1 1 1
Push button (KNX-PL-Link) 1–2**** 1–2**** 1***
* Must be the same device
** Cannot be combined with additional push-button devices (KNX PL-Link)
*** Cannot be combined with additional light or blind control devices
**** Must be the same device, and every light group is switched by maximum one push button or dimmed by one pair of push buttons
Room units
QMX2.. QMX3..
P33 P43 P36 P34 P74
Features
Mode selection ⦁ ⦁ ⦁ ⦁ ⦁
Fan switch ⦁ ⦁ ⦁ ⦁ ⦁
Set point adjuster ⦁ ⦁ ⦁ ⦁ ⦁
Temperature sensor ⦁ ⦁ ⦁ ⦁ ⦁
Humidity sensor ⦁ ⦁
Air quality sensor ⦁
Mounting
Flush-mounted ⦁
Directly on wall ⦁ ⦁ ⦁ ⦁
Integration into DXR2…
Data points 3 3 3 3 5
KNX PL-Link bus load (mA) 7.5 7.5 12.5 7.5 15
HVAC Sensor (KNX PL-Link)
AQR2570... and AQR2532NNW AQR2570... and AQR2533NNW AQR2570... and AQR2535NNW AQR2570... and AQR253NNWQ AQR2576... and AQR2530NNW AQR2576... and AQR2532NNW AQR2576... and AQR2533NNW AQR2576... and AQR2535NNW AQR2576... and AQR253NNWQ QMX3.P30 QMX3.P40 QMX3.P70
Features
LED indication air
quality
⦁ ⦁ ⦁
Temperature sensor ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁
Humidity sensor ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁
Air quality sensor ⦁ ⦁ ⦁ ⦁ ⦁ ⦁
Mounting
Flush-mounted ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁
Directly on wall ⦁ ⦁ ⦁
Integration into DXR2…
Data points 1 1 2 3 1 2 2 3 3 1 2 3
KNX PL-Link bus load
(mA)
5 5 5 5 15 15 15 15 15 7.5 7.5 15
4–10
4–11
1 1
3
2
3
2
4 4
Room automation
Overview and selection tools
Room automation
Overview and selection tools