User Guide

Alarms
Working with Alarms
3
90 | 393
Siemens
User Guide Version 3.0
A6V10415471
Building Technologies
2017-11-30
 The list of events will no longer be filtered by tags, but any other filters you
applied will still remain active. (Check the Event List header to see them.)
Related Topics
Tagging Events in Event List [➙ 88]
Removing Filters from Event List [➙ 86]
Applying an Advanced Filter to Event List [➙ 86]
3.1.16.9 Enabling and Disabling Autoremove Filters When a New
Event Comes in
Scenario: When you apply filters to Event List, it means you will not see any new
incoming events that do not match the current filter criteria. To avoid missing
events, you can configure the system to automatically remove all filters whenever a
new event comes in.
To enable autoremove:
1. Click the filter icon , and select Autoremove on New Events (if it is not
already selected: a checkmark indicates that the option is already active).
 When new events come in any applied filters will be automatically removed.
To disable autoremove:
1. Click the filter icon and deselect Autoremove on New Events.
 Any applied filters will persist even if new events come in.
NOTE:
Autoremove is on by default and it is not allowed to disable it in Danger
Management AT and Total Building Solution AT profiles.
3.1.17 Customizing the Columns in Event List
Scenario: You want to customize what columns display in Event List, change their
order, or resize them.
Perform the procedures in this section as needed.
3.1.17.1 Moving or Resizing a Column Directly in Event List
 You want to resize a column in Event List, or move it to a different position.
1. To resize a column, drag the edge of its column header in Event List to the
desired width.
2. To move a column to a different position, drag-and-drop its column header in
Event List to the desired position.
Related Topics
Adding, Removing, or Rearranging Columns in Event List [➙ 91]
Restoring the Default Column Settings in Event List [➙ 91]
Event Descriptor Reference [➙ 102]