User Guide

Alarms
Working with Alarms
3
89 | 393
Siemens
User Guide Version 3.0
A6V10415471
Building Technologies
2017-11-30
2. Click tag .
 The event is now tagged, and the tag icon displays in its event descriptor.
 In case of recurrences of an event, the parent recurring event and all its
recurrences are tagged and the Hide tagged events filter applies. If a new
recurrence occurs, the parent recurring event shows again and displays
only the new recurrence.
NOTE: The Recurring Events counter shows the total number of
recurrences, regardless of whether they are tagged.
3. To untag the event, click again.
NOTE 1:
You can also use CTRL or SHIFT to select multiple events to tag or untag them
all together with a single click. When you select multiple events and you tag or
untag an individual event of the selection, all the events selected are tagged or
untagged.
NOTE 2:
When a tagged event changes its state, it is automatically untagged. If the current
filter allows, this event is displayed again.
Next Step:
To selectively show/hide the tagged events, proceed to Applying or Removing a
Tag Filter in Event List [➙ 89].
Related Topics
Filtering Event List [➙ 85]
Applying or Removing a Tag Filter in Event List
 You previously tagged some events in Event List, and now you want to
selectively hide or show the tagged events.
1. To apply a tag filter, do one of the following:
– Click the filter icon , select Filter by Tag, and click either Hide tagged
events or Show tagged events only. (A check mark displays next to
whichever option is currently selected).
– Click the filter icon and click Advanced Filter. In the dialog box, from the
Tag drop-down list, select either Hide tagged events or Show tagged
events only.
 The list of events is filtered accordingly. Applying a tag filter does not
remove any other filters you have applied. Filter by tag works in
combination with the other filter criteria. You can check the currently
applied filter criteria in the Event List header.
2. To remove a tag filter, do one of the following:
– Click the filter icon , select Filter by Tag, and clear both check boxes to
show both tagged and untagged events.
– Click the filter icon and click Advanced Filter. In the dialog box, from the
Tag drop-down list, select Show both tagged and untagged events.