User Guide

Alarms
Working with Alarms
3
86 | 393
Siemens
User Guide Version 3.0
A6V10415471
Building Technologies
2017-11-30
3.1.16.2 Applying a Simple Filter to Event List
 You want to filter Event List by a single criterion, for example, category,
date/time, discipline, or source status.
1. In the Summary bar, click the filter icon .
2. Select what you want to filter by (for example, Event Status), and then click the
criterion you want to apply (for example, Unprocessed).
 Event List is filtered to show only the events that match the criterion. The color
of the filter icon changes to red . The header of the Event List displays the
currently applied filter.
NOTE: This type of filter only applies one criterion at a time. If you repeat the
above steps to select a different criterion (for example, Source Status=Active, or
Date and Time=Last hour) the previously applied filter will be cleared. To apply
multiple criteria, see Applying an Advanced Filter to Event List [➙ 86].
Related Topics
Removing Filters from Event List [➙ 86]
3.1.16.3 Removing Filters from Event List
 You want to remove all the filters currently applied to Event List.
1. In the Summary bar, click the filter icon and select Remove Filter.
 Event List displays an unfiltered list, containing all the events. The color of the
filter icon changes to gray .
Related Topics
Applying a Simple Filter to Event List [➙ 86]
Applying an Advanced Filter to Event List [➙ 86]
Event List Reference [➙ 96]
3.1.16.4 Applying an Advanced Filter to Event List
 You want to filter Event List by multiple criteria simultaneously.
1. In the Summary bar, click filter and select Advanced Filter.
 The Advanced Filter dialog box displays.
2. If you want to filter by Category, Discipline, Event status, and/or Source status:
– Select the check box for the criterion you want to apply (for example,
Category) then select one or more values (for example, Life Safety and
Fault).
– Repeat the preceding step for any other criteria you want to apply (for
example, Discipline).
3. Use the drop-down lists to specify any other filter criteria you want to apply:
– Location/Designation: Type in some part of the System-Browser path or
designation of the event source. For example, Management
System.Clients.