User Guide
Alarms
Working with Alarms
3
83 | 393
Siemens
User Guide Version 3.0
A6V10415471
Building Technologies
2017-11-30
Related Topics
Event List Reference [➙ 96]
Investigative Treatment Window Reference [➙ 98]
Assisted Treatment Window Reference [➙ 99]
3.1.13 Changing the Sorting of Events
You want to change the default sorting of events in Event List, for example to
order them first by Category.
In Event List, click on the Category column header.
Default event sorting changes according to the applied criterion.
Event sorting is not allowed in UL 864-compliant and ULC S527-compliant fire
stations, Danger Management EN, Total Building Solution UL, and Total Building
Solution ULC profiles.
Related Topics
Event Sorting Reference [➙ 113]
3.1.14 Handling Recurrences of an Event
This section contains instructions for handling recurrent events. For background
information see Recurring Events Reference [➙ 114].
Perform the procedures in this section as needed.
Recurring events grouped together under a parent event are not allowed in UL
864-compliant and ULC S527-compliant fire stations. This behavior is not allowed
also in Danger Management AT, and Total Building Solution NA profiles. In all the
above case, events belonging to the same source and category display as
individual events in Event List.
3.1.14.1 Expanding or Hiding the Recurrences of an Event
The Counter column in the event descriptor of an event contains a number,
which means it is a parent recurring event.
1. To expand the individual recurrences, in Event List, click inside the Counter
column of the parent event.
NOTE: Although the Counter column is also visible in the Event Detail bar,
Investigative Treatment, and Assisted Treatment windows, you can only
expand the individual recurrences of an event within Event List.
All the recurrences of this event display underneath the parent event. The
recurrences have smaller event buttons than the parent event, and are
sorted most recent on top.
NOTE: While the recurrences are expanded like this you cannot filter Event
List. However, you can first filter Event List and then expand the
recurrences.
2. To hide the recurrences, click inside the Counter column of the parent event
again.