User Guide

System Manager
System Browser
2
55 | 393
Siemens
User Guide Version 3.0
A6V10415471
Building Technologies
2017-11-30
4
Manual Navigation
check box
One of two methods for making objects the primary selection in
System Manager. By default, automatic selection is enabled,
which means that any object you select in System Browser
automatically becomes the new primary selection for the system.
If you want to scroll through the System Browser tree and
highlight an object without making it the primary selection, check
the Manual Navigation box, and then single-click the object. If
you then decide that you want to make the highlighted selection
the new primary selection, you can do one of the following:
● Right-click and select either Send to the Primary Pane, or
Send to the Secondary Pane.
● Click the Send button (sends to Primary pane only)
● Double-click (for single-object selection only, and sends to
Primary pane only)
5
System browser tree
Displays system objects in a hierarchy.
6
Filtering icon
Displays the Filtering Search area, where you can limit your
search. You filter the objects by selecting individual or multiple
building control disciplines, subdisciplines, types, subtypes, and
aliases (which are case sensitive). Additionally, the Other drop-
down list box allows you to filter for out of scan, override
protection, and validation profile settings.
Clicking the X in the Alias field clears only the Alias field. Clicking
the Clear button clears the Discipline, Type, Other, and Alias
fields.
Selecting the Search within selection check box applies your filter
selections only to the current node selection in the System
Browser tree.
Clicking the Search button starts the search and displays the
results of your filter selections.
7
Save icon
Allows you to save a search entry for later use. Saving a search
does not save the node location at the time of the save, only the
filtering selections. This applies even if you select the Search
within selection check box. You access saved searches by
selecting the drop-down arrow in the Search list box.
8
Send button
The Send button works in conjunction with the Manual Navigation
check box. Once you select the check box and highlight an
object, click the Send button and the object becomes the new
primary selection for the system.