User Guide

Reactions
Enabling or Disabling a Reaction
11
371 | 393
Siemens
User Guide Version 3.0
A6V10415471
Building Technologies
2017-11-30
11 Reactions
This section provides background information and instructions for using Reactions
in Desigo CC.
11.1 Enabling or Disabling a Reaction
 You want to manually change the operational status of a reaction.
1. In System Browser, select Application View.
2. Select Applications > Logics > Reactions > [reaction].
 In the Operation tab, the Operational Status (Enabled/Disabled) of the
reaction displays.
3. Click Enable or Disable.
 The Operational Status (Enabled/Disabled) of the reaction updates
accordingly.
Related Topics
Properties and Commands of a Reaction [➙ 372]
11.2 Reactions Reference
Reactions are automations programmed into the system, so that when a specific
situation occurs on the site, a command or series of commands—similar to those in
a macro--are automatically executed.
For example, in Total Building Solution (TBS) architectures (combination of danger
management and building automation), a reaction may be configured to control a
fire door or a ventilation system when a fire alarm occurs.
In Operating mode you can only view the reactions already configured in the
system, and issue commands to enable or disable them.
Location of Reactions
Reaction objects are located under Applications > Logics > Reactions in the
Application View of System Browser. They may be further organized into
subfolders under the main Reactions folder.