User Guide

Reports
Reports Reference
8
300 | 393
Siemens
User Guide Version 3.0
A6V10415471
Building Technologies
2017-11-30
Margins
The Margins menu has four preconfigured margins with values displayed for quick
selection:
● Normal (default)
● Narrow
● Moderate
● Wide
8.2.7.2 Placement Group Box
The Placement group box provides icons so you can rearrange the position of the
report elements in a Report Definition by selecting an element and using the icons:
Move up , Move down , Move to top , and Move to bottom .
When there is only one element present or if there are multiple elements but none
is selected, then all four icons are unavailable.
8.2.7.3 Position Group Box
The Position group box allows you to adjust the position of the layout elements of a
Report Definition.
Figure 30: Position Group Box
Position Group Box
Alignment
Refers to the placement of objects or layout elements on the report page. The
different alignments are: Left, Center, and Right.
Indentation
Allows you to set the distance between the report page margin and the actual
placement of the element.
Spacing
Allows you to set the space before and after the layout elements.
Width
Allows you to adjust the width of a layout element (logo and plot only).
Height
Allows you to adjust the height of a table/plot (logo and plot only).
8.2.7.4 Font Group Box
The Font group box allows you to apply a font type, size, style and/or color to the
layout elements such as a label or a table. The Font group box becomes enabled
only when you have inserted a label or a table in a Report Definition template while
configuring a Report Definition.
Figure 31: Font Group Box