User Guide

Reports
Reports Reference
8
298 | 393
Siemens
User Guide Version 3.0
A6V10415471
Building Technologies
2017-11-30
Time Filter Dialog Box Components
Field
Description
Date time specification
Shows LOCAL, when the Date/Time in UTC format check box on the Home
tab is not selected.
Select Column
Displays only when an Events, All Logs, or Activities table is selected in the
Report Definition. The entries in the drop-down list depend on table selected
and allow you to filter information accordingly.
Events:
Event Time - Time when the event occurred
Event Went - Time when the event state changed
Transition Time - Time when the event was closed
All Logs:
Date/Time – Date/Time when the activity is performed or state change of the
event occurred.
Event Time - Time when the event occurred
Source Time -
Reference Time –
Activities:
Source Time -
Reference Time -
Exact
Allows you to filter data based on the exact date specified.
Custom
The Custom option allows you to set the date and time as per your
requirement. Selecting the Custom option enables the From/To field. The To
date should always be greater than From date. If the To date is less than the
From date, then the To field is highlighted in red and an error message
displays on mouse-over.
The From and To date should be same as the date already set in Short date
on your management station.
The Short Date is to be found under Short date: (Start > Control Panel >
Regional and Language Options > Regional Options)
Relative
Relative has two options: Last and Current Period.
The Last option allows you to filter data for the last 'x' period that you specify.
For example, last 'x' hours, last 'x' months, last 'x' years, last 'x' weeks, last 'x'
days, or last 'x' minutes.
The Current Period option allows you to filter data for the current 'x' period
that you specify. For example, current 'x' hours, current 'x' months, current 'x'
years, current 'x' weeks, current 'x' days, or current 'x' minutes.
For example, if the current date and time on your computer is 10/07/2014
10.35 AM and you specify any of the following:
1 Hour in the Last option - The data for the 9:00 to 10:00 AM period is
retrieved
1 Hour in the Current Period option - The data for the 10:00 to 11:00 AM
period is retrieved
1 Month in the Last option - The data for the period June 01,2014 to July 01,
2014 is retrieved.
1 Month in the Current Period option - The data for the period July 01, 2014
to August 01, 2014 is retrieved.
1 Year in the Last option - The data for the period January 01, 2013 to
January 01, 2014 is retrieved.
1 Year in the Current Period option - The data for the period January 01,
2014 to January 01, 2015 is retrieved
NOTE: The Last and the Current Period field accepts only integer values up
to 3 digits.