User Guide

Reports
Reports Reference
8
284 | 393
Siemens
User Guide Version 3.0
A6V10415471
Building Technologies
2017-11-30
clicked. A number (starting with 1) on the column header indicates the sorting
priority. For example, Source time (1), Date (2), Discipline (3), and so on.
You can sort the table columns in Edit mode as well as in Run mode.
If you sort the table columns in Edit mode, then the sorted data displays in Run
mode according to the sort criteria specified in Edit mode. When sorting is applied
on an executed report, data in the current snapshot is sorted.
NOTE:
Sorting is unavailable during report execution. Sorting is re-enabled once report
execution is complete or you stop a report execution.
Select Columns Dialog Box
You can add, remove, or reorder columns in a table using the Select Columns
dialog box.
Select Columns Dialog Box Components
Description
Parent tab
Allows you to add, remove, or reorder Parent columns in the table.
Object Type
(Displays only for a Point table) Lists the object collection. When an object is
selected in the Object Type drop-down list, all the associated properties are
listed in the Available Columns list.
Type filter
(Displays only for an Objects table) Allows you to enter the object type
description on which you want to filter the object types to be displayed in the
Type drop-down list. For example, if you want the Type drop-down list to
display all BACnet object types, enter BACnet as the type filter.
Type
(Displays only for an Objects table) Displays the list of object types available
in the system. You must select the object type whose columns are to be
displayed in the Available columns field.
NOTE: In case of a distributed system, the Type drop down list displays the
Object Models of only the current system on which the report is configured.
Load
(Displays only for an Objects table) Click this button to populate the
Available columns list with the columns corresponding to the selected object
type in the Type list.