User Guide
Getting Started
System Screen
1
26 | 393
Siemens
User Guide Version 3.0
A6V10415471
Building Technologies
2017-11-30
Audio Alert Status
Active
1)
The system has detected a new alarm, or there are still alarms
in the unprocessed state. You can temporarily silence or
permanently turn off the audio alert.
Muted
You temporarily silenced the audio alert. After 24 hours the
system will automatically re-activate the sound (audio alert
reminder).
Disabled
2)
You completely disabled the audio alert. This means it is
permanently turned off, and the system will not emit any sound
when new alarms occur.
1)
In UL 864-compliant and ULC S527-compliant fire stations, Danger Management AT/EN, and
Total Building Solution AT/EN/NA profiles you can only temporarily silence the audio alert.
.2)
This status is available only in Building Automation EN/NA profiles. In particular, in Building
Automation EN profile, the audio alert is permanently muted but you can enable it when
required.
1.5.1.6 System Menu Reference
The Menu located on the Summary bar [➙ 23] provides several items for you to
carry out different tasks.
● Help: Launches online Help.
● Applications: Opens a new System Manager window. See Creating Additional
System Manager Windows [➙ 34].
● Operator: Performs the following tasks:
– Switchover: See Doing an Operator Switchover [➙ 21].
– Change User password: See Changing Your Password [➙ 21].
NOTE: This option is not available if you are logged on as Windows user.
Also, a message prompts you if you enter an invalid password.
● About Page: See Displaying the About Page [➙ 29].
● Print: See Printing from the System Menu [➙ 30].
● Active Tasks: See Switching Between Active Windows [➙ 27].
● Exit: Ends your work session, and shut down the system. See Exiting the
Application [➙ 19].
● Logoff: (available in Close Mode only), logs you off and automatically logs on
the GMSDefaultUser. See Exiting a Closed Mode Session [➙ 20].
1.5.1.7 Printouts Reference
In Operating mode, Desigo CC allows you to use any configured printer to print out
application data:
● From the system menu on the Summary bar. See Printing from the System
Menu [➙ 30].
● Directly from with system applications such as Event List, Reports, and so on.
See, for example, Printing the Whole Event List [➙ 85]