User Guide

Getting Started
Starting and Exiting the System
1
20 | 393
Siemens
User Guide Version 3.0
A6V10415471
Building Technologies
2017-11-30
1.4.5 Interrupting the Auto Logoff
 You are working on a Desigo CC station and your user group was configured
for auto-logoff after a period of operator inactivity.
 The log off message box displays the time remaining before the automatic log
off.
 To stop the logoff, move the cursor or press any key on the keyboard.
 The auto log off is interrupted.
1.4.6 Accessing a Closed Mode Client
In Closed Mode stations, when the computer is powered up Desigo CC starts
automatically with the GMSDefaultUser logged on. To log on, you must log off the
GMSDefaultUser and then log on with your own credentials.
1. In the Summary bar, select Menu > Logoff.
 A message box informs you that Desigo CC will be closed and you will be
logged on.
2. Click OK.
 GMSDefaultUser is logged off. The initialization splash screen displays for
a few seconds. Then the logon dialog box displays.
3. Enter your username and password.
4. Select the domain.
5. Click Logon.
 Desigo CC restarts in Closed Mode with your credentials.
Related Topics
Exiting a Closed Mode Session [➙ 20]
Troubleshooting Logon Problems [➙ 33]
1.4.7 Exiting a Closed Mode Session
In Closed Mode, you cannot shut down Desigo CC. You can only log off to end
your session, after which the GMSDefaultUser is automatically logged on.
1. In the Summary bar, select Menu > Logoff.
 A message box informs you that Desigo CC will be closed and the
GMSDefaultUser will be logged on.
2. Click OK.
 You are logged off. Desigo CC starts in Closed Mode and the GMSDefaultUser
is automatically logged on.