User Guide

Trends
Working with Trends
7
185 | 393
Siemens
User Guide Version 3.0
A6V10415471
Building Technologies
2017-11-30
NOTE 1:
Measured values display on top of one another when the changes to the
measured values occur in quick succession or the selected time range is too
large. Since the measured values are no longer readable, select a smaller time
range or switch off the labels.
NOTE 2:
You can see the measured values only when you stop the Trend View.
Related Topics
Displaying Quality Attributes [➙ 219]
Series [➙ 225]
7.1.1.12 Displaying Quality Attributes
You want to also display the quality attribute for the data point at the time of the
measured value .
 A Trend View is open.
1. Select the series for editing from the legend for the Trend View.
2. Click Properties .
3. Click the Series Properties tab.
4. Select the Show quality icons check box.
5. Click Save .
6. Click Stop .
 Interventions or states that are not normal display with the corresponding
quality attribute.
For example, (see Quality Attributes)
NOTE 1:
The quality attributes are hidden when you re-click Run and the trend series is
updated.
NOTE 2:
You must select Advanced display if chart stopped in the Chart Properties tab
(acts on all series) if you want to display quality attributes during update. If there
are too many symbols, the update to the Trend View can take some time.
NOTE 3:
With the reduced display , not all quality attributes can display. In order to
display all quality attributes, limit the time period.
Related Topics
Series [➙ 225]
Quality Attributes [➙ 219]