User Guide

Trends
Working with Trends
7
184 | 393
Siemens
User Guide Version 3.0
A6V10415471
Building Technologies
2017-11-30
3. Click the Series Properties tab.
4. Select the Show markers check box.
– Select the corresponding type from the Marker style drop-
down list.
– Select the appropriate size from the Marker size drop-down list.
5. Click Save .
 The edited properties are saved to the Trend database.
6. Click Stop to stop the new data updates in the trend view.
 The markers display on the trend view.
NOTE:
Be careful not to select too thick a line if you want to display markers. The marker
disappears behind a thick line. You can see the markers only when you stop the
trend view.
Related Topics
Displaying Quality Attributes [➙ 219]
Series [➙ 225]
7.1.1.11 Displaying Measured Values in Trend View
You want to also display the measured value for the data point at the time of the
measured value .
 A Trend View is open.
 The Show quality icons property must be selected.
1. Select the series for editing from the legend for the Trend View.
2. Click Properties .
3. Click the Series Properties tab.
4. Select the Show Values check box.
5. Click Save .
 The current measured values are updated in the chart each time a data
point's measured value changes.
6. Click Stop to stop the new data updates in the Trend View.
 The measured values display on the Trend View.