User Guide

Schedules
Working with Schedules
6
159 | 393
Siemens
User Guide Version 3.0
A6V10415471
Building Technologies
2017-11-30
6.1.1.20 Modifying an Exception Entry
 System Manager is in Operating mode.
1. In System Browser, select Application View.
2. Select Schedules > BACnetSchedules.
3. Open the schedule you want to modify.
4. In the schedule area, select the exception entry you want to modify.
NOTE: Exception entries are highlighted with a red bar on the left side of the
entry.
5. In the Exceptions tab, modify the fields as needed.
NOTE: If you use wildcards for date ranges, make sure to read your vendor’s
field panel documentation since the implementation of this feature is vendor-
specific.
6. Click Save .
6.1.2 Working with Management Station Schedules
This section provides step-by-step instructions for using management station
schedules. For background information, see Management Station Schedules
Reference [➙ 171].
Perform the procedures in this section as needed.
6.1.2.1 Adding a Management Station Calendar
1. In System Browser, select Application View > Schedules > Management
Station Calendars.
2. From the Scheduler toolbar, click Save .
3. Complete the Name and Description fields.
4. Click OK.
6.1.2.2 Adding a Management Station Schedule
 System Manager is in Operating mode.
1. In System Browser, select Application View.
2. Select Schedules > Management Station Schedules.
 The Scheduler displays.
3. From the Setup tab, complete the following:
a. From the Start Date drop-down list, select the start date for the schedule.
Selecting the Any date check box defaults to the current date.
b. From the End Date drop-down list, select the end date for the schedule.
Selecting the Any date check box defaults to an infinite date.
4. Click the Outputs tab, and then drag objects from System Browser you want
associated with the schedule.