User Guide

Schedules
Working with Schedules
6
158 | 393
Siemens
User Guide Version 3.0
A6V10415471
Building Technologies
2017-11-30
1. To delete a calendar entry, click the Delete icon associated with the entry.
NOTE: Do not click the Delete icon from the Scheduler toolbar, or you will
delete the entire calendar.
2. To add a calendar entry, click the New+ button, and then select the settings
you want.
3. Click Save .
6.1.1.17 Modifying a Command
 System Manager is in Operating mode.
1. In System Browser, select Application View.
2. Select Schedules > BACnetCommands.
3. Open the command you want to modify.
4. Make changes to the Text Group and the Applied Schedules sections, and to
the states in the Command Table Action List.
5. Click Save .
6.1.1.18 Modifying a Weekly Schedule Entry
 System Manager is in Operating mode.
1. In System Browser, select Application View.
2. Select Schedules > BACnetSchedules.
3. Open the schedule you want to modify.
4. Select the weekly schedule you want to modify.
NOTE: Weekly schedules are highlighted with a blue bar on the left side of the
entry.
5. In the Schedule Entries tab, modify the Time and Value fields.
6. Click Save .
6.1.1.19 Modifying an Exception
 System Manager is in Operating mode.
1. In System Browser, select Application View.
2. Select Schedules > BACnetSchedules.
3. Open the schedule with the exception you want to modify.
4. In the schedule area, click the exception you want to modify.
NOTE: Exceptions are highlighted with a red bar on the left side of the entry.
5. In the Exceptions tab, modify the fields as needed.
NOTE: If you use wildcards for date ranges (the Advanced check box), make
sure to read your vendor’s field panel documentation since the implementation
of this feature is vendor-specific.
6. Click Save .