User Guide

Schedules
Working with Schedules
6
157 | 393
Siemens
User Guide Version 3.0
A6V10415471
Building Technologies
2017-11-30
delete default entries at other times, as long as there are still entries at
beginning and end of day. You can also replace the entry at beginning or end
of day with a non-default entry.
6. Click Save .
6.1.1.14 Deleting an Exception
 System Manager is in Operating mode.
1. In System Browser, select Application View.
2. Select Schedules > BACnetSchedules.
3. Open the schedule.
4. Right-click the exception you want to delete.
NOTE: Exceptions are highlighted with a red bar on the left side of the entry.
5. Click Delete Exception.
6. Click Save .
6.1.1.15 Deleting an Exception Entry
 System Manager is in Operating mode.
1. In System Browser, select Application View.
2. Select Schedules > BACnetSchedules.
3. Open the schedule.
4. Right-click the exception entry you want to delete.
NOTE: Exception entries are highlighted with a red bar on the left side of the
entry.
5. Click Delete Exception.
6. Click Save .
6.1.1.16 Modifying a BACnet Calendar
 System Manager is in Operating mode.
1. In System Browser, select Application View.
2. Select Schedules > BACnetCalendars.
3. Open the calendar you want to update.
 To modify start dates, end dates, or recurrence settings, select a calendar entry
from the Calendar Entries section, and then select the settings you want.
NOTE: If you use wildcards for date ranges (the Advanced check box), make
sure to read your vendor’s field panel documentation since the implementation
of this feature is vendor-specific.