User Guide

Remote Notifications
Remote Notifications Reference
5
149 | 393
Siemens
User Guide Version 3.0
A6V10415471
Building Technologies
2017-11-30
5.2.2.2 RENO Messages Toolbar Controls
In Operating mode, when you work with remote notifications, the RENO Messages
toolbar is available. It allows you to start, stop, and clear remote notifications.
Alarm-based notifications
New notifications
Start RENO
procedure
Start sending or re-sending the
currently selected remote notification.
The icon is dimmed while sending is in
progress.
Start re-sending the new (operator-
issued) notification.
Stop RENO
procedure
Stop the remote notification that is
currently in progress. If successful, the
remote notification overall outcome
becomes Aborted; the status of
pending recipients becomes
Cancelled.
Notifications can only be stopped if
they are configured as Can be stopped
(see General Settings of a Remote
Notification).
Remote notifications with manual
sending can be stopped while they are
in progress. Notifications with
automatic sending can only be stopped
during the time delay before they start.
Stop monitoring the message status of
new (operator-issued) notification.
Stop RENO
procedure
escalation
Stop the escalation for the currently selected recipient group: If the group does
not reach its threshold of required responses, any escalation does not start. The
status of the groups and recipients involved becomes Stop.
If there is more than one recipient group with an escalation list, to stop all
escalations you must select each group in turn and repeat this step to disable its
escalation.
This command is not available if an escalation has already started.
Clear manual
procedure
n.a.
Only available for new (operator-issued)
remote notifications in the Secondary
pane. Remove the selected notification
from the list.
Back to
configuration
n.a
Only available for new (operator-issued).
Go back and compose another
message.