User Guide

Remote Notifications
Working with Remote Notifications
5
141 | 393
Siemens
User Guide Version 3.0
A6V10415471
Building Technologies
2017-11-30
Next Steps:
If required, proceed to:
● Monitoring the Progress and Outcomes of Sent Notifications [➙ 139]
● Stopping a Remote Notification from Event List [➙ 141]
Related Topics
Remote Notifications Reference [➙ 143]
5.1.5 Stopping a Remote Notification from Event List
Scenario: Sending of a remote notification is in progress. The notification was
configured with Starting Mode = Manual and Can be stopped = Yes. You now want
to interrupt (halt) sending of the messages.
 You previously started a remote notification from Event List, and the Stop
Remote Notifications command is available for the event.
1. In Event List, click Stop Remote Notifications for the event.
 The system stops sending the notification messages preconfigured for this
event. The Start Remote Notifications command is available for the
event.
Next Steps:
If required, proceed to:
● Monitoring the Progress and Outcomes of Sent Notifications [➙ 139]
● Starting a Remote Notification from Event List [➙ 140]
Related Topics
Remote Notifications Reference [➙ 143]
5.1.6 Stopping a Remote Notification from the Message Status
List
Scenario: You want to interrupt sending of a remote notification that is currently in
progress.
 System Manager is in Operating mode.
 You are displaying the Message Status list.
 In the Message Status list, select the remote notification that is currently being
sent (its overall outcome will display as Running).
 The Stop RENO procedure icon is enabled if the notification can be
stopped.
1. Click Stop RENO procedure .
 The system stops sending the remote notification messages. The overall
outcome of the notification becomes Aborted. The status of any pending
recipients becomes Cancelled.
Next Step:
If required, proceed to Halting the Escalation of a Remote Notification [➙ 142].