User Guide

Graphics Viewer
Graphics Viewer Reference
4
131 | 393
Siemens
User Guide Version 3.0
A6V10415471
Building Technologies
2017-11-30
Zoom View
Displays the Zoom view and allows you to zoom in on the active
graphic by adjusting the slider.
Aerial View
Switches between Aerial View being visible or hidden in the
Graphics Viewer area.
Zoom Real
Allows you to zoom in on the active graphic. To activate, click the
icon. To de-activate, left- click anywhere on the graphic.
Scale to fit
Scales the graphic to fit in the viewing area. Once selected, the
graphic resizes itself according to window size.
Selecting the button, changing the Zoom selection, or loading
another graphic, disables the feature.
Point Centered display
mode
Moves the selected point to the center of the graphic.
Fit to Secondary
Selection
Allows you to calculate the depth and the viewport from the
current selection.
Depths Navigation View
Switches between Depths Navigation view being visible or
hidden in the Graphics Viewer area.
This view allows you to view a graphic content by depth, and by
layer, or by discipline associated with a layer.
Show Status and
Commands pane
Allows you to enable or disable the Status and Commands
window from displaying.
Coverage Area mode
When this icon is enabled, it allows you to view the coverage
areas on the graphic.
When disabled, no coverage areas display on the graphic.
Page setup
Displays the Page setup view for the current graphic.
Print
Displays the Print dialog box to print the current graphic.