User Guide

Graphics Viewer
Working with Graphics Viewer
4
119 | 393
Siemens
User Guide Version 3.0
A6V10415471
Building Technologies
2017-11-30
 A graphic is displayed in the Graphics Viewer.
 If you are dragging an object or symbol to the Graphics Editor, you must have
another System Manager pane open. See, Launching a New System Manager.
1. Hover over an element or symbol in the Graphics Viewer. A red border displays
around the highlighted object.
2. Click and drag.
 The cursor changes to .
3. Release the mouse button when the cursor changes to over the intended
drop target.
 The data from the object is copied to the area or field.
4.1.11 Editing a Graphic
 System Manager is in Operating mode.
1. In System Browser, select Application View.
2. Select Applications > Graphics > [graphic].
3. Click Edit .
 The Graphics Editor displays.
4. Make modifications to the graphic..
5. Click Save As .
6. In the Save As dialog box, do the following:
a. Select a destination folder.
b. Enter a name.
c. Click Save.
 The edited graphic is saved.
4.1.12 Enabling Point Centered Display Mode
 System Manager is in Operating mode.
1. In System Browser, select Application View.
2. Select Applications > Graphics.
3. Select the point object.
4. Click Point Centered Display mode and select one of the following options:
– Point: Point Centered Display mode is enabled for the point object to
display in the center of the pane or canvas.
– Group – Point Centered Display mode is enabled for point objects to
display in the center of the pane or canvas.
 A checkmark displays next to the selected mode and the Point Centered
Display mode is set on the canvas.
4.1.13 Navigating to a Linked Element
If configured, an element on a graphic can be used as direct navigation to an
internal or external link.