User Guide

Graphics Viewer
Working with Graphics Viewer
4
116 | 393
Siemens
User Guide Version 3.0
A6V10415471
Building Technologies
2017-11-30
3. Click the command button that displays the command you want to execute.
 If the command does not have arguments associated with it, the command
is sent and the status displays.
4. (Optional) If the command button has arguments associated with it, proceed to
Step 5.
5. (Optional) Complete the required fields if any are associated with the
command.
6. Click Send.
 The system displays the status of the command.
4.1.3 Creating a Graphic
 System Manager is in Operating mode.
1. In System Browser, select Application View.
2. Select Application > Graphics.
3. In the Graphics Viewer, click the Operating button to switch to Engineering
mode.
4. Click New , and select New Template Graphic.
 A blank, tabbed graphic template displays in the Graphics Editor work area.
5. Create and design the graphic as necessary.
6. Click Save As .
 The Save As dialog box displays.
7. Do one of the following:
Saving a Graphic
1. Select the Graphics folder where you want to save the graphic.
2. Enter a name for your graphic.
3. Click Save.
 The graphic is saved to GMSProjects > [Name of Your Project] > Graphics
folder or sub-folder you may have selected.
NOTE: The graphic is saved in both a .CCG and a .PNG file format.
Saving a Graphic Template
1. Navigate to the Libraries folder that contains the Graphics Template folder
where you want to save the graphic template.
2. Enter a name for your graphic template.
3. Click Save.
 The template is saved in a CCT and .PNG file format.
4.1.4 Creating a Graphics Sub-Folder
You want to create a Graphics sub-folder in System Browser and in your project's
Graphics folder.
 System Manager is in Engineering mode.
 The Graphics Editor is displayed in the in the Graphics tab of the work area.