User Guide
Alarms
Alarms and Event Treatment Reference
3
101 | 393
Siemens
User Guide Version 3.0
A6V10415471
Building Technologies
2017-11-30
● Automatic or manual
● Mandatory or optional
● Repeatable or not repeatable
Figure 15: Steps Workspace
1
Symbol that indicates a mandatory step.
2
Step identifier. This number may or may not correspond to the execution order.
3
Briefly describes the type step.
4
Depending on the step's configuration, you will see a white or gray check box:
A tooltip tells you that you cannot check off the step because you have not done
all the actions required to complete the step (for example, complete a remote
notification procedure or fill out and save an event treatment report).
A tooltip tells you that you that you can check off the step to mark it as
completed.
Once you check off a step as executed, a checkmark icon displays in the place of the
check box, to indicate that the step has been completed.
5
Graphically indicates the step's execution status as follows:
in progress
successfully executed
failed
6
Graphically indicates that the step is selected and the relevant application for performing
that step is available in the Default tab of the Primary pane.
● Each step has the same color as the event's category. When you select a step,
it expands and changes to a darker color to indicate that it is being executed.
Once you complete a step, a graphic icon indicates the execution outcome of
that step (successful or failed).
● You must execute the first mandatory step before the following mandatory
steps can be selected and executed.
1 4
5
6
2
3