Engineering Documentation
Table Of Contents
- Copyright Notice
- 1 About this document
- 2 Desigo Control Point Operation engineering topics
- 2.1 Tool-free configuration of a Desigo Control Point device
- 2.1.1 Connecting to the Desigo Control Point device
- 2.1.2 Performing the initial login
- 2.1.3 Configuring the Network port for IP (PXG3.Wx00 and PXM… touch panel)
- 2.1.4 Activating the application (PXG3.Wx00 and PXM… touch panel)
- 2.1.5 Assigning devices to the Desigo Control Point device
- 2.1.6 Updating the Network port for a browser connection (PXM… touch panel)
- 2.1.7 Subscribing to the time master and time synchronization for Assigned devices
- 2.1.8 Configuring for kiosk graphics on a touch panel
- 2.2 Tool-free commissioning of the Operation application
- 2.3 Data point integration overview
- 2.4 Plant view Tools
- 2.4.1 Using the graphics wizard to create a graphic
- 2.4.2 Editing a graphic
- 2.4.3 Removing a graphic
- 2.4.4 Displaying the URL of a graphic
- 2.4.5 Exporting graphics for sharing across jobs
- 2.4.6 Importing graphics
- 2.4.7 Enabling graphics and kiosks for room users to view
- 2.4.8 Defining graphics as a startup page
- 2.5 Working with kiosk graphics
- 2.6 Using engineering notations
- 2.1 Tool-free configuration of a Desigo Control Point device
- 3 Graphics engineering with Graphics Builder
- 3.1 Graphics Builder overview
- 3.2 Using the Builder pane tools
- 3.3 Graphics libraries
- 3.4 Workflows
- 3.5 Working with dashboards
- 3.5.1 The Facility manager dashboard user interface
- 3.5.2 The Public dashboard user interface
- 3.5.3 Adding and editing a text box
- 3.5.4 Adding or replacing a background image
- 3.5.5 Adding information from a trended data point
- 3.5.6 Adding external media to a dashboard
- 3.5.7 Working with gauges
- 3.5.8 Editing charts
- 3.6 Creating end-user room graphics
- 3.7 Advanced functionality
- 4 Tips and tricks
- 4.1 Updates required after a time zone change
- 4.2 APPLY BATCH TAGS > Custom Filter button is reserved for future use
- 4.3 Graphic components within models cannot be modified
- 4.4 A graphic with relative binding that includes data points from different branches of the hierarchy cannot be created at the Root level
- 4.5 Relative hyperlinks cannot be added to a graphic at the Root level
- 4.6 Relative hyperlinks in a graphic are broken if the graphic is engineered offline and then imported to another device
- 4.7 Haystack interface
- 4.8 Automatic logout from the Operation application causes Graphics Builder to temporarily stop working
- Index
Graphics engineering with Graphics Builder
Graphics libraries
75 | 138
Siemens
A6V11211560_enUS_b
Building Technologies
2019-01-15
Figure 9: Example of a supersample AHU graphic.
Pre-loaded supersample graphics library
The following tables outline the supersample graphics that are currently pre-loaded in
the Desigo Control Point device.
Note
Primary supersamples can only be used as graphic templates. Automatic connection of
data points to graphic elements is not supported.
Table 14: Primary supersamples.
Supersample graphic name
Look
Description
Sample AHU_ERCPL_HC_HUM_H_TPH
2D+ / 2D
AHU; ERC (plate); heating and cooling; humidifier; humidity, temperature and
pressure control
Sample AHU_ERCRnacl_HC_TP
2D+ / 2D
AHU; ERC (run around coil); heating and cooling; temperature and pressure
control
Sample AHU_ERC_HC_TP
2D+ / 2D
AHU; ERC (rotary); heating and cooling; temperature and pressure control
Sample AHU_ERC_H_TP
2D+ / 2D
AHU; ERC (rotary); heating only; temperature and pressure control
Sample AHU_MIX_HC_TP
2D+ / 2D
AHU; ERC (mixing circuit); heating and cooling; temperature and pressure
control
Sample CGEN_1Ch
2D+ / 2D
Cooling generation: one chiller
Sample CGRP_1Grp
2D+ / 2D
Cooling group: one group
Sample CGrp_1Grp_Pu
2D+ / 2D
Cooling group: one group with mixing circuit
Sample Dhw_DhwHyd
2D+ / 2D
Domestic hot water: with hydraulic charge
Sample HGEN_1Bo
2D+ / 2D
Heat generation: one boiler
Sample HGEN_2Bo
2D+ / 2D
Heat generation: two boilers