Engineering Documentation

Desigo Control Point Operation engineering topics
Data point integration overview
30 | 138
Siemens
A6V11211560_enUS_b
Building Technologies
2019-01-15
2.3.3.1 Using the Advanced integration function
After the data points from a device have been integrated to the Desigo Control Point
device, the Advanced integration manually adds or removes individual BACnet objects
for monitoring. For example, you can select Basic operation as the Integration level for
an individual DXR. After data points from the DXR are integrated, you can manually
add objects to use for troubleshooting.
Figure 2: Example of Advanced integration function with two objects manually added and one removed.
Using the Advanced data point integration function
 Data points have already been integrated from the device that contains the desired
BACnet objects.
1. Select > > Data point integration.
2. Click Advanced for the device that contains the desired BACnet objects.
 The Advanced page displays the tree view for the selected device.
3. Navigate through the building structure to locate the desired BACnet objects.
 If a check box is selected, the BACnet object is already included in the
integration function either because it was included in the selected Integration
level, or it was previously manually-selected.
4. Select the check box for any BACnet objects to be integrated.
5. Clear the check box for any BACnet objects to be removed from monitoring.
6. Click Apply to save your changes.
 The Data point integration list is displayed.
7. Select the check box(es) for the device(s) that were updated and click Integrate to
update the data points that are being monitored.