Engineering Documentation
Table Of Contents
- Copyright Notice
- 1 About this document
- 2 Desigo Control Point Operation engineering topics
- 2.1 Tool-free configuration of a Desigo Control Point device
- 2.1.1 Connecting to the Desigo Control Point device
- 2.1.2 Performing the initial login
- 2.1.3 Configuring the Network port for IP (PXG3.Wx00 and PXM… touch panel)
- 2.1.4 Activating the application (PXG3.Wx00 and PXM… touch panel)
- 2.1.5 Assigning devices to the Desigo Control Point device
- 2.1.6 Updating the Network port for a browser connection (PXM… touch panel)
- 2.1.7 Subscribing to the time master and time synchronization for Assigned devices
- 2.1.8 Configuring for kiosk graphics on a touch panel
- 2.2 Tool-free commissioning of the Operation application
- 2.3 Data point integration overview
- 2.4 Plant view Tools
- 2.4.1 Using the graphics wizard to create a graphic
- 2.4.2 Editing a graphic
- 2.4.3 Removing a graphic
- 2.4.4 Displaying the URL of a graphic
- 2.4.5 Exporting graphics for sharing across jobs
- 2.4.6 Importing graphics
- 2.4.7 Enabling graphics and kiosks for room users to view
- 2.4.8 Defining graphics as a startup page
- 2.5 Working with kiosk graphics
- 2.6 Using engineering notations
- 2.1 Tool-free configuration of a Desigo Control Point device
- 3 Graphics engineering with Graphics Builder
- 3.1 Graphics Builder overview
- 3.2 Using the Builder pane tools
- 3.3 Graphics libraries
- 3.4 Workflows
- 3.5 Working with dashboards
- 3.5.1 The Facility manager dashboard user interface
- 3.5.2 The Public dashboard user interface
- 3.5.3 Adding and editing a text box
- 3.5.4 Adding or replacing a background image
- 3.5.5 Adding information from a trended data point
- 3.5.6 Adding external media to a dashboard
- 3.5.7 Working with gauges
- 3.5.8 Editing charts
- 3.6 Creating end-user room graphics
- 3.7 Advanced functionality
- 4 Tips and tricks
- 4.1 Updates required after a time zone change
- 4.2 APPLY BATCH TAGS > Custom Filter button is reserved for future use
- 4.3 Graphic components within models cannot be modified
- 4.4 A graphic with relative binding that includes data points from different branches of the hierarchy cannot be created at the Root level
- 4.5 Relative hyperlinks cannot be added to a graphic at the Root level
- 4.6 Relative hyperlinks in a graphic are broken if the graphic is engineered offline and then imported to another device
- 4.7 Haystack interface
- 4.8 Automatic logout from the Operation application causes Graphics Builder to temporarily stop working
- Index
Desigo Control Point Operation engineering topics
Tool-free commissioning of the Operation application
22 | 138
Siemens
A6V11211560_enUS_b
Building Technologies
2019-01-15
Possible next step: Configuring settings for Alarms [➙ 22]
2.2.5 Configuring settings for Alarms
This section configures the following settings for Alarms:
● Alarm polling
By default, the database is polled every two seconds. Polling every two seconds
may not be necessary at some sites and may impact the performance of other
activities taking place in the system. For these situations, select a poll rate that is
more appropriate for the site.
● Alarm history
By default, alarms older than one year are deleted by the Operation application
every day at 10:00 P.M. Configure alarm history if these settings are not
appropriate for your site.
● Alarm routing
By default, the application makes three attempts to send an alarm notification email
if the alarm has not been acknowledged. The default interval between each
attempt is 15 minutes. Configure alarm routing if these settings are not appropriate
for your site.
Alarm polling
Alarms is selected in the core function pane.
1. Select > > Alarm polling.
2. Select a value from the Poll rate drop-down list.
3. To save your selections, click Apply.
Alarm history
Alarms is selected in the core function pane.
1. Select > > Configure alarm history.
2. Use the following table to make selections in the Configure alarm history dialog
box.
3. To save your selections, click Apply.