Engineering Documentation

Desigo Control Point Operation engineering topics
Tool-free commissioning of the Operation application
20 | 138
Siemens
A6V11211560_enUS_b
Building Technologies
2019-01-15
Setting
Description
Date format
Select a date format. For example, DD.MM.YYYY, YYYY/MM/DD or
MM-DD-YYYY.
Time format
Select the 24h or 12h time format.
Possible next step: Configuring email recipients [➙ 20]
2.2.2 Configuring email recipients
This procedure adds email addresses for those who are allowed to receive emails from
Desigo Control Point.
1. Select > > Configure email recipients > .
2. In the Add email recipients dialog box, type one or more email addresses
separated by a comma.
3. Click Apply to save the email addresses.
4. If desired, select the Send test email check box to send a test email to the list of
recipients.
5. Click OK to complete the procedure.
Possible next step: Configuring an SMTP server [➙ 20]
2.2.3 Configuring an SMTP server
This procedure configures an SMTP server to send emails through Desigo Control
Point.
NOTICE
Corporate network restrictions may prevent you from using the configuration settings
outlined in this section.
Please clarify the network security policies at each site.
1. Select > > SMTP settings to display the SMTP settings from the project
database.
2. Use the information in the following table to update the settings.
3. To save your changes, click Apply.
 The Test connection dialog box displays.
4. To send a test email, enter an email address in the Recipient field and click Test.
Otherwise, click Cancel to finish the configuration.
5. If the test fails, click Edit to review the settings and fix any errors. If the settings are
correct, contact your IT department.