User Manual

Operating Step
-
by
-
Step
Scheduling
2
68 | 352 A6V10415471_en_a_40
a The management station schedule of the selected type is created and a time
period is assigned to the schedule.
2 – Create Schedule Entries
1. Select Applications > Schedules > Management Station Schedules >
[Management Station Schedule]
2. Perform either of the following steps to add a new schedule entry.
– Navigate to the Day/Week view, right-click, and select Add Weekly Entry.
– Click New in the Schedule Entries tab.
NOTE: In case of weekly schedules, the Output values section is located in
the Setup tab.
3. Specify the time from when you want to start executing the schedule.
4. Click Save to save the schedule entries.
a The weekly schedule entry is created.
3 – Add an Exception with Entries
1. Select Applications > Schedules > Management Station Schedules >
[Management Station Schedule]
2. Perform either of the following steps to add an exception.
– In the Day/Week view, right-click on the day from which you want to add an
exception and select Add Exception.
– Click New in the Exceptions tab.
3. Select the Date exception type and define the time period when the exception
shall be active.
4. In the Exception Times section, define the periods and the related schedules
states for the days in the defined period (that will override the definitions of the
weekly schedule). The exception periods are marked in red color.
5. In the Active Values section map the Exception active value to a value of the
linked Outputs.
6. Click Save .
NOTE: Before the exception block can appear in the daily or weekly view, you
must create at least one Time and Value pair, and one of the values must be
ON.
a An exception period is now defined for the management station schedule.
Next, you can configure an Organization Mode as the Output of a schedule.
2.4.3 Additional Scheduling Procedures
Select the following for additional information on BACnet schedules, Management
Station schedules, and Timeline Viewer.
2.4.3.1 BACnet Schedules
Select any of the procedures for information on BACnet Schedules, Calendars,
Commands, Weekly Schedules, and Exceptions.
For background information, see BACnet Schedules reference [➙ 227].
Prerequisites:
● System Browser is in Application View.