User Manual

Operating Step
-
by
-
Step
Alarms
2
A6V10415471_en_a_40 51 | 352
The Assisted Treatment window is moved to the background but not
closed.
2.
(Optional) If required, you can select other events in Event List, and send
event-handling commands from there. You cannot select the event that is
currently in assisted treatment.
3. To return to assisted treatment, in the Summary bar, do one of the following:
– Click Close Event List .
– Select Menu > Active Tasks > Assisted Treatment.
a The Assisted Treatment window returns to the foreground and you can
resume the procedure where you left off.
Interrupt Assisted Treatment of an Event
You can interrupt assisted treatment of an event at any time, and later resume the
operating procedure from where you left off.
l To interrupt assisted treatment of an event, do one of the following:
– In the Assisted Treatment window, click the event button in the event
descriptor along the top.
– In Event List or the Event Detail bar, click the blank placeholder that
displays in the position of the event button.
a The Assisted Treatment window closes. In Event List, the event is
deselected, and the event button displays again instead of the blank
placeholder. The Event Status remains as it was when you interrupted
handling the event. When you start assisted treatment of this event again,
the procedure will resume from where you left off.
NOTE:
You can only have one event in assisted or investigative treatment at any given
time. If you want to start assisted or investigative treatment of another event, this
will interrupt any assisted/investigative treatment currently in progress. However,
you can later resume the interrupted treatment from where you left off.
Finish Assisted Treatment of an Event
When you have sent all the required event- handling commands and completed at
least the mandatory steps of the operating procedure, the Event Status changes to
Closed, and the Suggested Action is Suspend the event.
l Do one of the following:
– In the Assisted Treatment window, click the event button in the event
descriptor along the top.
– In Event List or the Event Detail bar, click the blank placeholder that
displays in the position of the event button.
a The Assisted Treatment window closes, and the event is cleared from Event
List.