User Manual

Operating Step
-
by
-
Step
Alarms
2
46 | 352 A6V10415471_en_a_40
2.
(Optional) If required, you can select other events in Event List, and send
event-handling commands from there. You cannot select the event that is
currently in investigative treatment.
3. To return to investigative treatment, in the Summary bar, do one of the
following:
– Click Close Event List .
– Select Menu > Active Tasks > Investigative Treatment.
a The Investigative Treatment window returns to the foreground and you can
resume the handling of the event from there.
Interrupt Investigative Treatment of an Event
You can interrupt the investigative treatment of an event at any time, and then
either finish the handling of the event from Event List or resume investigative
treatment later.
l To interrupt investigative treatment of an event, do one of the following:
– In the Investigative Treatment window, click the event button in the event
descriptor along the top.
– In Event List or the Event Detail bar, click the blank placeholder that
displays in the position of the event button.
a The Investigative Treatment window closes. In Event List, the event is
deselected, and the event button displays again instead of the blank
placeholder. The Event Status remains as it was when you interrupted handling
the event.
NOTE:
You can only have one event in assisted or investigative treatment at any given
time. If you want to start assisted or investigative treatment of another event, this
will interrupt any assisted/investigative treatment currently in progress. However,
you can later resume the interrupted treatment from where you left off.
Finish Investigative Treatment of an Event
When you have sent all the required commands and finished handling the event,
the Event Status changes to Closed and the Suggested Action is Suspend the
event.
l Do one of the following:
– In the Investigative Treatment window, click the event button in the event
descriptor along the top.
– In Event List or the Event Detail bar, click the blank placeholder that
displays in the position of the event button.
a The Investigative Treatment window closes, and the event is cleared from
Event List.