User Manual

Operating Step
-
by
-
Step
Alarms
2
44 | 352 A6V10415471_en_a_40
Finish Handling an Event
When you have finished handling an event its Event Status changes to Closed.
Depending on configuration, the event may be automatically cleared from the list.
Otherwise:
l Click the event button again to deselect the event and clear it from the list.
2.3.2 Handling an Event with Investigative Treatment
The investigative treatment window lets you send event-handling commands while
using System Manager to inspect the event source.
Figure 4: Investigative Treatment Window
Start Investigative Treatment
w An event button
without the icon is available in Event List, or in the Event
Detail bar.
NOTE: If the icon is present you must instead handle the event with
assisted treatment. See Handling Events with Assisted Treatment [➙ 46].
l Do one of the following:
– If the event is not yet selected, depending on the Client Profile, single-click
or double-click the event button.
– If the event is already selected, in the Information column, click Opens
related treatment .
a The Investigative Treatment window opens. This is a window like System
Manager, with the event descriptor along the top, and the object that caused
the event already selected in System Browser. In Event List, the event button