User Manual

Operating Step
-
by
-
Step
Graphics Viewer
2
36 | 352 A6V10415471_en_a_40
1. In System Browser, select Application View.
2. Select Applications > Graphics > [graphic object].
a Graphics Viewer displays the graphic object.
Select Objects within Graphics Viewer
w You have a graphic open, and you would like to view the properties of an object
on the graphic.
w System Manager is in Operating mode.
1. In System Browser, select Application View.
2. Select Applications > Graphics > [graphic].
3. Click the object. You can also select multiple objects by holding down the
CTRL key while clicking on more than one object.
a The object becomes the focus, and the object properties display in Property
Viewer.
2.2.4 Working with the Point Centered Display Mode
Select the topic related to your task:
Enable Point Centered Display Mode
w System Manager is in Operating mode.
1. In System Browser, select Application View.
2. Select Applications > Graphics.
3. Select the point object.
4. Click Point Centered Display mode and select one of the following options:
– Point: Point Centered Display mode is enabled for the point object to
display in the center of the pane or canvas.
– Group – Point Centered Display mode is enabled for point objects to
display in the center of the pane or canvas.
a A checkmark displays next to the selected mode and the Point Centered
Display mode is set on the canvas.
Disable Point Centered Display Mode
w System Manager is in Engineering mode.
1. In System Browser, select Application View.
2. Select Application > Graphics.
3. Click Point Centered Display mode .
4. Select None.
a Point Centered Display mode is disabled.