User Manual

Operating Reference
Other Applications
3
A6V10415471_en_a_40 345 | 352
– Replace Existing Filter: The linked objects will replace the existing ones in
the Path field.
– Add New Filter: Creates a new row with the linked objects added to the
Path field of the new row, and all the other fields set to All.
– Cancel Operation: Operation is canceled.
● In the Path field you can also:
– Click the drop-down list to view all the linked objects.
– Click the x next to an object to remove it.
– Use the search box to filter the objects in the drop-down list. Note that the
search box does not accept wildcards.
– Move your cursor over an object, and an asterisk (*) in the tooltip will
indicate that the object includes subtrees.
Managed Type. This field defines the application that will display when the target
object is selected in System Browser. You can filter by one of the available values
that are inherited from the object model configuration.
Discipline/Subdiscipline, and Type/Subtype. You can use the equals (=) or not
equals (≠) operators to filter by:
● The Discipline/Subdiscipline of the target object.
● The Type/Subtype of the target object.
The row will be true for external web applications affecting the specified target
objects that also match any further criteria (managed type, discipline/subdiscipline,
type/subtype, function) specified here.
Function. This field specifies any functions associated to the target objects. You
can filter by one of the available values that are inherited from the object
configuration.
The following reference table describes how function settings affect triggers:
Function setting in the Triggers
expander
Function for the selected system
object
Result
All No function. The trigger is valid.
All For example, Area The trigger is valid.
For example, Area No function. The trigger is invalid.
For example, Area For example, Area The trigger is valid.
For example, Area For example, Buzzer The trigger is invalid.
Output
This section allows you to configure the display rules for an external web
application.
The select the Application used to launch
When you configure a display rule for an external web application the Output
expander lets you define the application that will be affected by the rule.
Select application, based on application the parameters display.