User Manual

Operating Reference
Trends
3
A6V10415471_en_a_40 295 | 352
Trends Toolbar
The Trends toolbar allows you to perform the following operations:
Function Description
Edit Trend Toggles between the Edit Trend mode and the View Trend
mode.
Start Creation Starts creating the trend logs depending on the configuration
specified in the Edit Trend mode.
New Trend
New Folder
Opens a new Trend View.
Creates a new folder.
Delete Deletes the current Trend View.
Save Saves the current Trend View.
NOTE: This command is not available until you modify the
current Trend View.
Save As Saves the Trend View under a new name.
Save as user default Saves the Trend View definition as a new user default.
Properties Opens the properties dialog box for chart, axes, legends, and
series.
Stop Stops trend logging.
Run Starts trend logging.
Refresh Refreshes the Trend View.
Compare view Opens the same Trend View a second time.
NOTE: In order to enable this button, you must hide the Trend
View properties and stop the Trend View.
Zoom Allows you select a time range in the currently selected Trend
View by effectively zooming in on the X-axis and Y-axis.
Time bar Shows/hides the time bar.
Table view Switches from graphical Trend View to a table view.
NOTE: In order to enable this button, you must stop the Trend
View.
Export Exports the Trend View Definition and saves it in a CSV file
format.
When you use Export in the table view, the exported data range
depends on the time setting in the graphical view.
Interpolated values are not exported to an export file
Print Prints the Trend View.
Show legend / Hide
legend
Shows/Hides the legend. This button is disabled when you
display the trend in the table view.