User Manual

Operating Reference
Reports
3
A6V10415471_en_a_40 241 | 352
The properties applicable to an object type can be displayed as columns in the
Objects table by setting the appropriate display levels in the Properties expander in
the Models and Functions tab. In the following screenshot, the AlarmFault and
Alarm.OffNormal properties cannot display as table columns since their display
levels are not set.
If a property has array attributes assigned to it, then the text entries in the text
group associated with the array attributes of the property can be set as the attribute
columns in the Objects table. For example, the Event_Time_Stamps property of the
BACnet Analog Input object type has the TxG_BACnetEventTransitionBits Text
group associated with its array attributes. You can set the text entries of the text
group (To Off Normal, To Fault, To Normal) to display as columns in the Objects
table.
Activities Report
The Activities report provides information on system activities over a period of time.
For example, you can generate an Activities report to get the treatment-related
information logged in the database for activities.
You can create and configure an Activities report if you want to determine the
number of times the present value property of an Analog Input object has
exceeded 100 in the last 24 hours. In order to monitor the change of value of any
property in the activities report, you must ensure that the AL attribute for the
property is selected for the respective Analog Input object. For this you must
navigate to the Properties expander in Object Configurator.