User Manual

Operating Reference
Alarms
3
222 | 352 A6V10415471_en_a_40
3.3.9 Event Status and Suggested Action
Event Status Suggested Action Icon in event
button
Fast / Investigative
Treatment
Assisted
Treatment
Unprocessed Acknowledge
event
The event is new and still unprocessed.
This means that you either did not yet
select the event, or that you selected it
but did not acknowledge it yet.
Ready to be
reset
Reset event Not applicable
In assisted
treatment, you
selected an event
and the source
status is back in
normal condition.
The Reset
command is
available.
Ready to be
closed
Reset event
You selected an
event and the
Reset command
is available.
You reset an
event, and all the
mandatory steps
of the assisted
procedure were
executed. The
Close command
is available.
Waiting for
condition
Wait for
condition
You acknowledged
the event but
cannot reset it yet.
-
Complete
Operating
Procedure
- You acknowledged
the event but
cannot reset it yet
because you must
first complete all
the mandatory
steps of the
assisted
procedure.
Closed Suspend the
event
- You reset the
event, and the
source status is
back in normal
condition. You can
clear the event.
You closed the
event and now you
can clear it.
3.3.9.1 Acknowledgment Models for Station-based Events
The following acknowledgment models are for station-based events:
● ACK and Reset required
● No Reset (ACK only required)
● No ACK, No Reset
● Optional ACK, No Reset