User Manual

Operating Reference
Alarms
3
216 | 352 A6V10415471_en_a_40
● Any changes you make to the columns in Event List will also apply to the Event
Detail bar and to the Investigative Treatment and Assisted Treatment windows.
● Changes to column settings will be automatically saved when you exit the
Desigo CC client application, and so will persist across sessions. Note that
column settings are specific to the user profile. This means that different users
can have different column settings.
The following describes the columns of the event descriptor.
Event Button
Situated on the leftmost end of each event descriptor. Graphically summarizes that
specific event. For more details, see the reference [➙ 219] section.
You cannot move, resize, or remove the
Event button
column.
Cause
Description of the event followed by the condition (either numeric value or
descriptive text) that caused the event. For example, Temperature too high
(39°C), Fault (INACTIVE), and so on. This description changes when the
event source passes from the Active to the Quiet state.
Path
Indicates the entire System Browser path of the object that issued the event. The
path is expressed using names or descriptions, depending on the Display mode as
well as the view selected in the System Browser drop-down list.
For BACnet Event Enrollment (EE) events, it displays the [name of the field
networks] + [name of the network] to which the EE event belongs.
The following optional columns may also be available, for indicating the object’s
path in other ways:
● Location Concatenation of descriptions relating to the event source. (It follows
the view selected in System Browser.)
● Designation Concatenation of names relating to the event source. (It follows
the view selected in System Browser.)
● Path [View] Indicates the full path of the object in alarm in a specified System
Browser view as follows:
– Path [Management View]
– Path [Application View]
– Path [Logical View]
– Path [Physical View]
– Path [user view]
Depending on the System Browser views that are configured, multiple such
columns may be available. How the path is expressed depends on the Display
mode.
Message text
Text that consists of one of the following:
● For driver alarms, the most recent message that has come from the field panel
at any alarm transitions.
● For workstation alarms, blank or the event cause.
The same data also displays in the Information column.