User Manual

Operating Reference
Alarms
3
214 | 352 A6V10415471_en_a_40
1 Symbol that indicates a mandatory step.
2 Step identifier. This number may or may not correspond to the execution order.
3 Briefly describes the step type.
4 Depending on the step's configuration, you will see a white or gray check box:
● A tooltip tells you that you cannot check off the step because you have not done
all the actions required to complete the step (for example, complete a remote
notification procedure or fill out and save an event treatment report).
● A tooltip tells you that you that you can check off the step to mark it as
completed.
Once you check off a step as executed, a checkmark icon displays in the place of the
check box, to indicate that the step has been completed.
5 Graphically indicates the step's execution status as follows:
● in progress
● successfully executed
● failed
6 Graphically indicates that the step is selected and the relevant application for performing
that step is available in the Default tab of the Primary pane.
● Each step has the same color as the event's category. When you select a step,
it expands and changes to a darker color to indicate that it is being executed.
Once you complete a step, a graphic icon indicates the execution outcome of
that step (successful or failed).
● You must execute the first mandatory step before the following mandatory
steps can be selected and executed.
1 4
5
6
2
3